본문 바로가기
Research/Broadcast

Universal LNB

by sunnyan 2006. 3. 13.
728x90
Universal" LNB 9.75 and 10.60 GHz L.O.


Works in 2 bands* 10.7-11.8 and 11.6 - 12.7 GHz. (22 kHz signal switched). Noise Figure usually 1.0 dB or better. Integral feed horn with 40mm neck but C120 flange type available in some models. Spigot fitting for Sky Minidishes.

A Universal LNB requires a 22kHz signal at 0.5v p-p to switch its Local Oscillator to 10.6GHz ("high band"). Otherwise it uses its 9.75GHz oscillator ("low band").

Polarisation switching is controlled by dc voltage supplied by the receiver. 12.5v to 14.5v gives vertical and 15.5 to 18v gives horizontal polarisation. A higher voltage than that may damage the LNB but most are OK up to 20v. A voltage that is too low (less than 12.5v) will prevent the LNB from working correctly.

728x90

'Research > Broadcast' 카테고리의 다른 글

SCART  (0) 2006.04.04
DVB 채널을 이용한 고속 인터넷 접속  (0) 2006.03.24
POD Module  (0) 2005.11.22
디지털 케이블방송 표준에서 복제방지기술  (0) 2005.11.22
클록 복구와 A/V 동기화  (0) 2005.10.19