CFE setenv

CFE> setenv -p nfsboot 'setenv -p STARTUP "boot -z -elf flash0.kernel: root=/dev
/nfs nfsroot=$ROOT_IPADDR:$ROOT_PATH ip$NET_IPADDR:$ROOT_IPADDR:$NET_GATEWAY:$NE
T_NETMASK:bcm:: rw mem=LSIZE console=ttyS0,115200"'
*** command status = 0
CFE> $nfsboot
*** command status = 0
CFE> printenv
Variable Name        Value
-------------------- --------------------------------------------------
        BOOT_CONSOLE uart0
   LINUX_FFS_STARTAD 0
      LINUX_FFS_SIZE 3c00000
  LINUX_PART_STARTAD 3c80000
     LINUX_PART_SIZE 37f800
                jffs boot -z -elf flash0.kernel: 'rootfstype=jffs2 root=/dev/mtd
block0 rw mem=192m'
                  F3 ifconfig eth0 -addr=61.74.164.11 -mask=255.255.255.0 -gw=61
.74.164.190 -dns=168.126.63.1
             vmlinuz flash -noheader 61.74.164.7:vmlinuz-7335b0-smp flash0.kerne
l
          NET_DEVICE eth0
          NET_IPADDR 61.74.164.11
         NET_NETMASK 255.255.255.0
         NET_GATEWAY 61.74.164.190
         ROOT_IPADDR 61.74.164.7
           ROOT_PATH /root/project/whs1000/rootfs
               LSIZE 184m
         ETH0_HWADDR 00:10:18:9A:22:5D
          DRAM0_SIZE 256
          DRAM1_SIZE 128
          FLASH_TYPE NOR
          FLASH_SIZE 64
         CFE_VERSION 2.12.18
       CFE_BOARDNAME BCM97335B0
      CFE_MEMORYSIZE 128
             nfsboot setenv -p STARTUP "boot -z -elf flash0.kernel: root=/dev/nf
s nfsroot=$ROOT_IPADDR:$ROOT_PATH ip$NET_IPADDR:$ROOT_IPADDR:$NET_GATEWAY:$NET_N
ETMASK:bcm:: rw mem=LSIZE console=ttyS0,115200"
             STARTUP boot -z -elf flash0.kernel: root=/dev/nfs nfsroot=61.74.164
.7:/root/project/whs1000/rootfs ip61.74.164.11:61.74.164.7:61.74.164.190:255.255
.255.0:bcm:: rw mem=LSIZE console=ttyS0,115200
*** command status = 0
CFE>